Electronics & ESD
Electronics & ESD thermoforming
Sensitive electronics need packaging and enclosures that dissipate static reliably and protect through handling and transit. Indu Thermoformers forms ESD-safe trays, PCB carriers and equipment enclosures in static-dissipative and conductive grades, with per-batch resistance verification.
ESD performance you can prove
Static-dissipative parts are only useful if the resistance is real and consistent. Our ESD ABS is permanently dissipative — the performance is compounded into the polymer, not a surface coating that wears off or fails in dry air. We verify surface resistivity per batch in the 10⁶–10⁹ Ω/sq band, with conductive (10⁴–10⁶ Ω) grades where full grounding is needed.
Trays, carriers and enclosures
We form ESD component and PCB handling trays with precision cavity grids; work-in-progress dunnage and kitting trays for the assembly line; and equipment enclosures that sit near sensitive electronics, in ESD or FR grades. Cleanroom-compatible carriers are available. Datum-referenced trimming holds cavity positions for automated pick-and-place.
Electronics parts we thermoform
Materials for electronics thermoforming
Why Indu for electronics thermoforming
In-house sheet extrusion
We extrude the sheet we form — grade, colour and thickness controlled from the pellet, with no outside vendor in the loop.
Largest bed in India
Thin- and thick-gauge lines, including the largest thermoforming bed in the country for oversized parts.
Tooling in 2–4 weeks
Moulds and trim fixtures designed and cut in-house on 5-axis CNC — fast, and cheap to revise.
ISO 9001 & full docs
8-gate inspection with COA, MTC, FAIR and PPAP-level documentation on request.
Frequently asked questions
What ESD resistance range do you offer?
Static-dissipative parts in the 10⁶–10⁹ Ω/sq band as standard, with conductive (10⁴–10⁶ Ω) grades on request. Surface resistivity is verified per batch.
Is your ESD performance coating-based?
No — our ESD ABS is permanently static-dissipative, with the performance compounded into the polymer. Unlike topical antistatic coatings, it does not wear off or lose effectiveness in dry conditions.
Can ESD trays be made for automated handling?
Yes — cavity grids are datum-referenced and CNC-trimmed to hold positional accuracy for pick-and-place and automated assembly.
Let’s build it
Need ESD-safe parts?
Send your component or tray drawing — we reply with the right ESD grade, cavity layout and a costed quote, usually within 24 hours.
ISO 9001:2015 certified · Most quotes back within 24 hours